AASAC-605 External Serial ATA-USIB interface cable that converts any Addonics Pocket, Mobile, Combo Hard Drive IDE and DigiCopier series storage into external Serial ATA storage device. Comes with integrated USB power cable to provide BUS power

CKEYEX6   6 feet Cipher key extension cable. Can be used to connect the Cipher key 6 feet from the CipherChain or any Addonics Cipher drive enclosure

AA2IDE80-12 12" UDMA 80-pin IDE ribbon cable with 2 female 40-pin IDE connectors for master ans slave device.

AA2IDE80-18 18" UDMA 80-pin IDE ribbon cable with 2 female 40-pin IDE connectors for master ans slave device.

AA2IMS50   Internal mini SAS (SFF-8087) to internal mini SAS cable  50 cm (~18 in.).

AA4SM50    4 SATA host connectors to internal mini SAS (SFF-8087) cable, 50 cm (~18 in.). This cable is for converting 4 SATA connectors from system board or host controller to one internal mini SAS connector.

AA5PUSBCL-3F USB 5-pin header to 5-pin header 3 feet cable. Suitable for connecting any device with USB 5-pin header connector to 5-pin header connector on system board.

AACAT5E10 10" CAT 5e network cable. Compatible with all Addonics NAS adapters and NAS storage.

AAESATA100C 100 cm. eSATA connecting cable with eSATA connectors on both ends. Full compliance with eSATA specification. Great for connecting external storage device with eSATA connectors to eSATA host controller.

AAESATA200C 200 cm. eSATA connecting cable with eSATA connector on both ends. Full compliance with eSATA specification. Great for connecting external storage device with eSATA connectors to eSATA host controller.

AAESATAP30C 1 foot eSATAp connecting cable. Full compliance with eSATA specification. Great for connecting external storage device with eSATAp connectors to eSATAp host controller.

AAFWC6F4MConvert standard 6-pin Firewire connector to 4-pin (iLink) connector

AAIB4C150 Infiniband 4X Multilane SATA cable. 150 cm with secure thumb screws. Compliant with SFF 8470 and include SATA2 blocking keys

AAIDE80-18 18" UDMA IDE interface cable with 40-pin female connector at each end of the cable. Good for ATA66/100/133 IDE or ATAPI drives

AAIDE80-8 UDMA IDE ribbon cable, 8" with 40-pin female IDE connector on each end. Replacement part for Storage Tower with USIB connector. Good for ATA33/66/100/133 IDE hard drives

AALVD320-3 LVD320 Ultra SCSI cable. Teflon coated, twisted and flat. 26" overall length and connects up to 2 devices after termination. Support data transfer rate of 320 MBps. Great for high performance servers and workstations.

AAM4S50    Internal mini SAS (SFF-8087) to 4 SATA connectors cable  50 cm (~18 in.). It is used for connecting 4 SATA storage devices to host via internal mini SAS port.

AAMS150   External mini SAS (SFF-8088) to external mini SAS (SFF-8088) connector cable, 150 cm (~ 4.9 ft.)

AAMSIB300   External mini SAS (SFF-8088) to external mini SAS (SFF-8088) connector cable, 300 cm (~ 9.8 ft.)

AAMSIB150   External mini SAS (SFF-8088) to InfiniBand connector (SFF-8470) cable, 150 cm (~ 4.9 ft.)

AAMSIB300   External mini SAS (SFF-8088) to InfiniBand connector (SFF-8470) cable, 300 cm (~ 9.8 ft.)

AASA2SA100C eSATA to SATA connecting cable, 100 cm. eSATA connector on one end and heavy duty SATA1 (regular SATA connector) on another end. Great for connecting external SATA storage device to eSATA port.

AASA2SAP15C Converter cable for adapting external standard SATA cable to the new External SATA (eSATA) connector. Require additional SATA cable to connect to standard SATA devices. This adapter cable is ideal for connecting SATA storage devices ...

AASA90L13C Left angle 90 degrees 13 cm. internal SATA data cable. Good for connecting Serial ATA hard drive, Serial ATA removable rack to Serial ATA controller, particularly for very tight clearance.

AASA90L18I Left angle 90 degrees 18-inch internal SATA data cable. Good for connecting Serial ATA hard drive, Serial ATA removable rack to Serial ATA controller, particularly for very tight clearance.